From 5a9fcc9980ae741c4657029c7e92d914072f824a Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Fri, 8 Oct 2010 10:22:43 -0700 Subject: [PATCH] omap3: Fix handling some GPIO's for WLAN-BT combo on IGEP v2 Some GPIO's used by WLAN-BT combo on IGEP v2 depends on hardware revision. This patch handles these GPIO's. ---------------------------------------------------------- | Hw Rev. | WIFI_NPD | WIFI_NRESET | BT_NRESET | ---------------------------------------------------------- | B | gpio94 | gpio95 | - | | B/C (B-compatible) | gpio94 | gpio95 | gpio137 | | C | gpio138 | gpio139 | gpio137 | ---------------------------------------------------------- Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-igep0020.c | 96 ++++++++++++++++++++++++++---------- 1 file changed, 69 insertions(+), 27 deletions(-) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index e70bc872bc2..22f73b4e0b4 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -39,22 +39,28 @@ #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 #define IGEP2_GPIO_USBH_NRESET 24 -#define IGEP2_GPIO_LED0_GREEN 26 -#define IGEP2_GPIO_LED0_RED 27 -#define IGEP2_GPIO_LED1_RED 28 -#define IGEP2_GPIO_DVI_PUP 170 -#define IGEP2_GPIO_WIFI_NPD 94 -#define IGEP2_GPIO_WIFI_NRESET 95 +#define IGEP2_GPIO_LED0_GREEN 26 +#define IGEP2_GPIO_LED0_RED 27 +#define IGEP2_GPIO_LED1_RED 28 +#define IGEP2_GPIO_DVI_PUP 170 + +#define IGEP2_RB_GPIO_WIFI_NPD 94 +#define IGEP2_RB_GPIO_WIFI_NRESET 95 +#define IGEP2_RB_GPIO_BT_NRESET 137 +#define IGEP2_RC_GPIO_WIFI_NPD 138 +#define IGEP2_RC_GPIO_WIFI_NRESET 139 +#define IGEP2_RC_GPIO_BT_NRESET 137 /* * IGEP2 Hardware Revision Table * - * -------------------------- - * | Id. | Hw Rev. | HW0 (28) | - * -------------------------- - * | 0 | B/C | high | - * | 1 | C | low | - * -------------------------- + * -------------------------------------------------------------------------- + * | Id. | Hw Rev. | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET | + * -------------------------------------------------------------------------- + * | 0 | B | high | gpio94 | gpio95 | - | + * | 0 | B/C (B-compatible) | high | gpio94 | gpio95 | gpio137 | + * | 1 | C | low | gpio138 | gpio139 | gpio137 | + * -------------------------------------------------------------------------- */ #define IGEP2_BOARD_HWREV_B 0 @@ -296,12 +302,14 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, +#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) { .mmc = 2, .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, +#endif {} /* Terminator */ }; @@ -578,6 +586,50 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) + +static void __init igep2_wlan_bt_init(void) +{ + unsigned npd, wreset, btreset; + + /* GPIO's for WLAN-BT combo depends on hardware revision */ + if (hwrev == IGEP2_BOARD_HWREV_B) { + npd = IGEP2_RB_GPIO_WIFI_NPD; + wreset = IGEP2_RB_GPIO_WIFI_NRESET; + btreset = IGEP2_RB_GPIO_BT_NRESET; + } else if (hwrev == IGEP2_BOARD_HWREV_C) { + npd = IGEP2_RC_GPIO_WIFI_NPD; + wreset = IGEP2_RC_GPIO_WIFI_NRESET; + btreset = IGEP2_RC_GPIO_BT_NRESET; + } else + return; + + /* Set GPIO's for WLAN-BT combo module */ + if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) && + (gpio_direction_output(npd, 1) == 0)) { + gpio_export(npd, 0); + } else + pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n"); + + if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) && + (gpio_direction_output(wreset, 1) == 0)) { + gpio_export(wreset, 0); + gpio_set_value(wreset, 0); + udelay(10); + gpio_set_value(wreset, 1); + } else + pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n"); + + if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) && + (gpio_direction_output(btreset, 1) == 0)) { + gpio_export(btreset, 0); + } else + pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n"); +} +#else +static inline void __init igep2_wlan_bt_init(void) { } +#endif + static void __init igep2_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -596,22 +648,12 @@ static void __init igep2_init(void) igep2_display_init(); igep2_init_smsc911x(); - /* GPIO W-LAN + Bluetooth combo module */ - if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) { - gpio_export(IGEP2_GPIO_WIFI_NPD, 0); -/* gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */ - } else - pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n"); + /* + * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. + */ + igep2_wlan_bt_init(); - if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) { - gpio_export(IGEP2_GPIO_WIFI_NRESET, 0); - gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0); - udelay(10); - gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1); - } else - pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n"); } MACHINE_START(IGEP0020, "IGEP v2 board") -- 2.11.0