From: Kukjin Kim Date: Sat, 11 Feb 2012 13:11:14 +0000 (+0900) Subject: ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5 X-Git-Url: http://git.mmlx.us/?a=commitdiff_plain;h=b67545fd9b5335c38c028e7984a1bef9e789c8dc;p=linux-edison.git ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5 In all of Samsung platform, the setup-i2c0.c file for I2C channel 0 is always compiled. So when supporting new SoC,it should be updated for it. Since EXYNOS5 GPIO will be supported after this, there is no setup gpio in there now. It will be implemented with that, of course. Signed-off-by: Kukjin Kim --- diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 995e7cc02be..2117f0257ef 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -52,7 +52,7 @@ obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o -obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o +obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c index d395bd17c38..b90d94c17f7 100644 --- a/arch/arm/mach-exynos/setup-i2c0.c +++ b/arch/arm/mach-exynos/setup-i2c0.c @@ -1,7 +1,5 @@ /* - * linux/arch/arm/mach-exynos4/setup-i2c0.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * I2C0 GPIO configuration. @@ -18,9 +16,14 @@ struct platform_device; /* don't need the contents */ #include #include #include +#include void s3c_i2c0_cfg_gpio(struct platform_device *dev) { + if (soc_is_exynos5250()) + /* will be implemented with gpio function */ + return; + s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); }