From: Will Deacon Date: Fri, 20 Jan 2012 11:10:18 +0000 (+0100) Subject: ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards X-Git-Url: http://git.mmlx.us/?a=commitdiff_plain;h=612539e81f655f6ac73c7af1da8701c1ee618aee;p=linux-edison.git ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards On v7, we use the same cache maintenance instructions for data lines as for unified lines. This was not the case for v6, where HARVARD_CACHE was defined to indicate the L1 cache topology. This patch removes the erroneous compile-time check for HARVARD_CACHE in proc-v7.S, ensuring that we perform I-side invalidation at boot. Reported-and-Acked-by: Shawn Guo Cc: stable Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index b1559740010..0404ccbb8aa 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -148,10 +148,6 @@ ENDPROC(cpu_v7_do_resume) * Initialise TLB, Caches, and MMU state ready to switch the MMU * on. Return in r0 the new CP15 C1 control register setting. * - * We automatically detect if we have a Harvard cache, and use the - * Harvard cache control instructions insead of the unified cache - * control instructions. - * * This should be able to cover all ARMv7 cores. * * It is assumed that: @@ -251,9 +247,7 @@ __v7_setup: #endif 3: mov r10, #0 -#ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate -#endif dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs