#include "mux.h"
#include "hsmmc.h"
+#include "common-board-devices.h"
#define SDP2430_CS0_BASE 0x04000000
#define SECONDARY_LCD_GPIO 147
.vmmc1 = &sdp2430_vmmc1,
};
-static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_24XX_SYS_NIRQ,
- .platform_data = &sdp2430_twldata,
- },
-};
-
static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2D),
{
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
- omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
- ARRAY_SIZE(sdp2430_i2c_boardinfo));
+ omap2_pmic_init("twl4030", &sdp2430_twldata);
return 0;
}
.vpll2 = &sdp3430_vpll2,
};
-static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &sdp3430_twldata,
- },
-};
-
static int __init omap3430_i2c_init(void)
{
/* i2c1 for PMIC only */
- omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
- ARRAY_SIZE(sdp3430_i2c_boardinfo));
+ omap3_pmic_init("twl4030", &sdp3430_twldata);
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
omap_register_i2c_bus(2, 400, NULL, 0);
/* i2c3 on display connector (for DVI, tfp410) */
#include "hsmmc.h"
#include "timer-gp.h"
#include "control.h"
+#include "common-board-devices.h"
#define ETH_KS8851_IRQ 34
#define ETH_KS8851_POWER_ON 48
.usb = &omap4_usbphy_data
};
-static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl6030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = OMAP44XX_IRQ_SYS_1N,
- .platform_data = &sdp4430_twldata,
- },
-};
static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
{
I2C_BOARD_INFO("tmp105", 0x48),
};
static int __init omap4_i2c_init(void)
{
- /*
- * Phoenix Audio IC needs I2C1 to
- * start with 400 KHz or less
- */
- omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
- ARRAY_SIZE(sdp4430_i2c_boardinfo));
+ omap4_pmic_init("twl6030", &sdp4430_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
.vpll2 = &cm_t35_vpll2,
};
-static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("tps65930", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &cm_t35_twldata,
- },
-};
-
static void __init cm_t35_init_i2c(void)
{
- omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo,
- ARRAY_SIZE(cm_t35_i2c_boardinfo));
+ omap3_pmic_init("tps65930", &cm_t35_twldata);
}
static void __init cm_t35_init_early(void)
.keypad = &devkit8000_kp_data,
};
-static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("tps65930", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &devkit8000_twldata,
- },
-};
-
static int __init devkit8000_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo,
- ARRAY_SIZE(devkit8000_i2c_boardinfo));
+ omap3_pmic_init("tps65930", &devkit8000_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
omap_register_i2c_bus(3, 400, NULL, 0);
#include "mux.h"
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
+#include "common-board-devices.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
.vio = &igep2_vio,
};
-static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &igep2_twldata,
- },
-};
-
static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
{
I2C_BOARD_INFO("eeprom", 0x50),
{
int ret;
- ret = omap_register_i2c_bus(1, 2600, igep2_i2c1_boardinfo,
- ARRAY_SIZE(igep2_i2c1_boardinfo));
- if (ret)
- pr_warning("IGEP2: Could not register I2C1 bus (%d)\n", ret);
+ omap3_pmic_init("twl4030", &igep2_twldata);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
#include "mux.h"
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
+#include "common-board-devices.h"
#define IGEP3_GPIO_LED0_GREEN 54
#define IGEP3_GPIO_LED0_RED 53
.vio = &igep3_vio,
};
-static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &igep3_twl4030_pdata,
- },
-};
-
static int __init igep3_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo,
- ARRAY_SIZE(igep3_i2c_boardinfo));
+ omap3_pmic_init("twl4030", &igep3_twl4030_pdata);
return 0;
}
.keypad = &ldp_kp_twl4030_data,
};
-static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &ldp_twldata,
- },
-};
-
static int __init omap_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, ldp_i2c_boardinfo,
- ARRAY_SIZE(ldp_i2c_boardinfo));
+ omap3_pmic_init("twl4030", &ldp_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
#include "hsmmc.h"
#include "timer-gp.h"
#include "pm.h"
+#include "common-board-devices.h"
#define NAND_BLOCK_SIZE SZ_128K
.vpll2 = &beagle_vpll2,
};
-static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &beagle_twldata,
- },
-};
-
static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
{
I2C_BOARD_INFO("eeprom", 0x50),
static int __init omap3_beagle_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
- ARRAY_SIZE(beagle_i2c_boardinfo));
+ omap3_pmic_init("twl4030", &beagle_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
.vdac = &omap3_evm_vdac,
.vpll2 = &omap3_evm_vpll2,
.vio = &omap3evm_vio,
-};
-
-static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &omap3evm_twldata,
- },
+ .vmmc1 = &omap3evm_vmmc1,
+ .vsim = &omap3evm_vsim,
};
static int __init omap3_evm_i2c_init(void)
{
- /*
- * REVISIT: These entries can be set in omap3evm_twl_data
- * after a merge with MFD tree
- */
- omap3evm_twldata.vmmc1 = &omap3evm_vmmc1;
- omap3evm_twldata.vsim = &omap3evm_vsim;
-
- omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
- ARRAY_SIZE(omap3evm_i2c_boardinfo));
+ omap3_pmic_init("twl4030", &omap3evm_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
#include "hsmmc.h"
#include "timer-gp.h"
#include "control.h"
+#include "common-board-devices.h"
#include <plat/mux.h>
#include <plat/board.h>
.vmmc1 = &omap3logic_vmmc1,
};
-static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &omap3logic_twldata,
- },
-};
-
static int __init omap3logic_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo,
- ARRAY_SIZE(omap3logic_i2c_boardinfo));
+ omap3_pmic_init("twl4030", &omap3logic_twldata);
return 0;
}
.bci = &pandora_bci_data,
};
-static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("tps65950", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &omap3pandora_twldata,
- },
-};
-
static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
{
I2C_BOARD_INFO("bq27500", 0x55),
static int __init omap3pandora_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
- ARRAY_SIZE(omap3pandora_i2c_boardinfo));
+ omap3_pmic_init("tps65950", &omap3pandora_twldata);
/* i2c2 pins are not connected */
omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
.codec = &omap3stalker_codec_data,
.vdac = &omap3_stalker_vdac,
.vpll2 = &omap3_stalker_vpll2,
-};
-
-static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &omap3stalker_twldata,
- },
+ .vmmc1 = &omap3stalker_vmmc1,
+ .vsim = &omap3stalker_vsim,
};
static struct at24_platform_data fram_info = {
static int __init omap3_stalker_i2c_init(void)
{
- /*
- * REVISIT: These entries can be set in omap3evm_twl_data
- * after a merge with MFD tree
- */
- omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1;
- omap3stalker_twldata.vsim = &omap3stalker_vsim;
-
- omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo,
- ARRAY_SIZE(omap3stalker_i2c_boardinfo));
+ omap3_pmic_init("twl4030", &omap3stalker_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
ARRAY_SIZE(omap3stalker_i2c_boardinfo3));
.vpll2 = &touchbook_vpll2,
};
-static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &touchbook_twldata,
- },
-};
-
static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("bq27200", 0x55),
static int __init omap3_touchbook_i2c_init(void)
{
/* Standard TouchBook bus */
- omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo,
- ARRAY_SIZE(touchbook_i2c_boardinfo));
+ omap3_pmic_init("twl4030", &touchbook_twldata);
/* Additional TouchBook bus */
omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
+#include "common-board-devices.h"
#define GPIO_HUB_POWER 1
#define GPIO_HUB_NRESET 62
.usb = &omap4_usbphy_data,
};
-static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl6030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = OMAP44XX_IRQ_SYS_1N,
- .platform_data = &omap4_panda_twldata,
- },
-};
-
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
* is connected as I2C slave device, and can be accessed at address 0x50
static int __init omap4_panda_i2c_init(void)
{
- /*
- * Phoenix Audio IC needs I2C1 to
- * start with 400 KHz or less
- */
- omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
- ARRAY_SIZE(omap4_panda_i2c_boardinfo));
+ omap4_pmic_init("twl6030", &omap4_panda_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
.vpll2 = &overo_vpll2,
};
-static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("tps65950", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &overo_twldata,
- },
-};
-
static int __init overo_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, overo_i2c_boardinfo,
- ARRAY_SIZE(overo_i2c_boardinfo));
+ omap3_pmic_init("tps65950", &overo_twldata);
/* i2c2 pins are used for gpio */
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
#include "mux.h"
#include "hsmmc.h"
#include "sdram-nokia.h"
+#include "common-board-devices.h"
static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
/* add rest of the children here */
};
-static struct i2c_board_info __initdata rm680_twl_i2c_board_info[] = {
- {
- I2C_BOARD_INFO("twl5031", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &rm680_twl_data,
- },
-};
-
static void __init rm680_i2c_init(void)
{
- omap_register_i2c_bus(1, 2900, rm680_twl_i2c_board_info,
- ARRAY_SIZE(rm680_twl_i2c_board_info));
+ omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
}
#include "mux.h"
#include "hsmmc.h"
+#include "common-board-devices.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
#define SYSTEM_REV_S_USES_VAUX3 0x8
.power_gpio = 98,
};
-static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
- {
- I2C_BOARD_INFO("twl5030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &rx51_twldata,
- },
-};
-
/* Audio setup data */
static struct aic3x_setup_data rx51_aic34_setup = {
.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
rx51_twldata.vaux3 = &rx51_vaux3_cam;
}
rx51_twldata.vmmc2 = &rx51_vmmc2;
- omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
- ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+ omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
omap_register_i2c_bus(3, 400, NULL, 0);
#include "mux.h"
#include "hsmmc.h"
+#include "common-board-devices.h"
#define OMAP_ZOOM_WLAN_PMENA_GPIO (101)
#define OMAP_ZOOM_WLAN_IRQ_GPIO (162)
.vdac = &zoom_vdac,
};
-static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl5030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &zoom_twldata,
- },
-};
-
static int __init omap_i2c_init(void)
{
if (machine_is_omap_zoom2()) {
zoom_audio_data.hs_extmute = 1;
zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
}
- omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
- ARRAY_SIZE(zoom_i2c_boardinfo));
+ omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
*
*/
+#include <linux/i2c.h>
+#include <linux/i2c/twl.h>
+
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <plat/i2c.h>
#include <plat/mcspi.h>
#include "common-board-devices.h"
+static struct i2c_board_info __initdata pmic_i2c_board_info = {
+ .addr = 0x48,
+ .flags = I2C_CLIENT_WAKE,
+};
+
+void __init omap_pmic_init(int bus, u32 clkrate,
+ const char *pmic_type, int pmic_irq,
+ struct twl4030_platform_data *pmic_data)
+{
+ strncpy(pmic_i2c_board_info.type, pmic_type,
+ sizeof(pmic_i2c_board_info.type));
+ pmic_i2c_board_info.irq = pmic_irq;
+ pmic_i2c_board_info.platform_data = pmic_data;
+
+ omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
+}
+
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1, /* 0: slave, 1: master */
#ifndef __OMAP_COMMON_BOARD_DEVICES__
#define __OMAP_COMMON_BOARD_DEVICES__
+struct twl4030_platform_data;
+
+void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
+ struct twl4030_platform_data *pmic_data);
+
+static inline void omap2_pmic_init(const char *pmic_type,
+ struct twl4030_platform_data *pmic_data)
+{
+ omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
+}
+
+static inline void omap3_pmic_init(const char *pmic_type,
+ struct twl4030_platform_data *pmic_data)
+{
+ omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
+}
+
+static inline void omap4_pmic_init(const char *pmic_type,
+ struct twl4030_platform_data *pmic_data)
+{
+ /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
+ omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
+}
+
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
struct ads7846_platform_data;