[MTD] maps: Add support for the "TQM834x" Boards
authorMarian Balakowicz <m8@semihalf.com>
Mon, 7 Nov 2005 08:33:38 +0000 (08:33 +0000)
committerThomas Gleixner <tglx@mtd.linutronix.de>
Mon, 7 Nov 2005 09:46:22 +0000 (10:46 +0100)
The following patch adds support for the TQ Systems  TQM834x  Boards.
Verified on TQM8349L.

This is a resubmit after integrating the suggested changes.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
drivers/mtd/maps/Kconfig
drivers/mtd/maps/Makefile
drivers/mtd/maps/tqm834x.c [new file with mode: 0644]

index 94a693f..e12e36a 100644 (file)
@@ -1,5 +1,5 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.59 2005/09/18 10:46:41 joern Exp $
+# $Id: Kconfig,v 1.60 2005/11/07 08:33:35 gleixner Exp $
 
 menu "Mapping drivers for chip access"
        depends on MTD!=n
@@ -347,6 +347,14 @@ config MTD_REDWOOD
          Redwood board. If you have one of these boards and would like to
          use the flash chips on it, say 'Y'.
 
+config MTD_TQM834x
+       tristate "Flash device mapped on TQ Components TQM834x Boards"
+       depends on MTD_CFI && TQM834x
+       help
+         This enables access routines for the flash chips on the
+         TQ Components TQM834x boards. If you have one of these boards
+         and would like to use the flash chips on it, say 'Y'.
+
 config MTD_CSTM_MIPS_IXX
        tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
        depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
index 2afa806..81f97c6 100644 (file)
@@ -1,7 +1,7 @@
 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.32 2005/09/18 10:46:41 joern Exp $
+# $Id: Makefile.common,v 1.33 2005/11/07 08:33:35 gleixner Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)              += map_funcs.o
@@ -72,3 +72,4 @@ obj-$(CONFIG_MTD_PLATRAM)     += plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)     += omap_nor.o
 obj-$(CONFIG_MTD_PQ2FADS)      += pq2fads.o
 obj-$(CONFIG_MTD_MTX1)         += mtx-1_flash.o
+obj-$(CONFIG_MTD_TQM834x)      += tqm834x.o
diff --git a/drivers/mtd/maps/tqm834x.c b/drivers/mtd/maps/tqm834x.c
new file mode 100644 (file)
index 0000000..d0bc959
--- /dev/null
@@ -0,0 +1,291 @@
+/*
+ * drivers/mtd/maps/tqm834x.c
+ *
+ * MTD mapping driver for TQM834x boards
+ *
+ * Copyright 2005 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <asm/ppcboot.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#define FLASH_BANK_MAX 2
+
+extern unsigned char __res[];
+
+/* trivial struct to describe partition information */
+struct mtd_part_def
+{
+       int nums;
+       unsigned char *type;
+       struct mtd_partition* mtd_part;
+};
+
+static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
+static struct map_info* map_banks[FLASH_BANK_MAX];
+static struct mtd_part_def part_banks[FLASH_BANK_MAX];
+
+static unsigned long num_banks;
+static unsigned long start_scan_addr;
+
+#ifdef CONFIG_MTD_PARTITIONS
+/*
+ * The following defines the partition layout of TQM834x boards.
+ *
+ * See include/linux/mtd/partitions.h for definition of the
+ * mtd_partition structure.
+ *
+ * Assume minimal initial size of 4 MiB per bank, will be updated
+ * later in init_tqm834x_mtd() routine.
+ */
+
+/* Partition definition for the first flash bank which is always present. */
+static struct mtd_partition tqm834x_partitions_bank1[] = {
+       {
+               .name   = "u-boot",             /* u-boot firmware      */
+               .offset = 0x00000000,
+               .size   = 0x00040000,           /* 256 KiB              */
+               /*mask_flags: MTD_WRITEABLE,     * force read-only      */
+       },
+       {
+               .name   = "env",                /* u-boot environment   */
+               .offset = 0x00040000,
+               .size   = 0x00020000,           /* 128 KiB              */
+               /*mask_flags: MTD_WRITEABLE,     * force read-only      */
+       },
+       {
+               .name   = "kernel",             /* linux kernel image   */
+               .offset = 0x00060000,
+               .size   = 0x00100000,           /* 1 MiB                */
+               /*mask_flags: MTD_WRITEABLE,     * force read-only      */
+       },
+       {
+               .name   = "initrd",             /* ramdisk image        */
+               .offset = 0x00160000,
+               .size   = 0x00200000,           /* 2 MiB                */
+       },
+       {
+               .name   = "user",               /* user data            */
+               .offset = 0x00360000,
+               .size   = 0x000a0000,           /* remaining space      */
+               /* NOTE: this parttion size is re-calcated in           */
+               /* init_tqm834x_mtd() to cover actual remaining space.  */
+       },
+};
+
+/* Partition definition for the second flash bank which may be present on some
+ * TQM834x boards.
+ */
+static struct mtd_partition tqm834x_partitions_bank2[] = {
+       {
+               .name   = "jffs2",              /* jffs2 filesystem     */
+               .offset = 0x00000000,
+               .size   = 0x00400000,           /* whole device         */
+               /* NOTE: this parttion size is re-calcated in           */
+               /* init_tqm834x_mtd() to cover actual device size.      */
+       },
+};
+
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static int __init init_tqm834x_mtd(void)
+{
+       int idx = 0, ret = 0;
+       unsigned long flash_addr, flash_size, mtd_size = 0;
+
+       /* pointer to TQM834x board info data */
+       bd_t *bd = (bd_t *)__res;
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+       int n;
+       char mtdid[4];
+       const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+       flash_addr = bd->bi_flashstart;
+       flash_size = bd->bi_flashsize;
+
+       /* request maximum flash size address space */
+       start_scan_addr = (unsigned long)ioremap(flash_addr, flash_size);
+       if (!start_scan_addr) {
+               printk("%s: Failed to ioremap address: 0x%lx\n",
+                      __FUNCTION__, flash_addr);
+               return -EIO;
+       }
+
+       for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
+               if (mtd_size >= flash_size)
+                       break;
+
+               pr_debug("%s: chip probing count %d\n", __FUNCTION__, idx);
+
+               map_banks[idx] = 
+                       (struct map_info *)kmalloc(sizeof(struct map_info),
+                                                  GFP_KERNEL);
+               if (map_banks[idx] == NULL) {
+                       ret = -ENOMEM;
+                       goto error_mem;
+               }
+               memset((void *)map_banks[idx], 0, sizeof(struct map_info));
+               map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
+               if (map_banks[idx]->name == NULL) {
+                       ret = -ENOMEM;
+                       goto error_mem;
+               }
+               memset((void *)map_banks[idx]->name, 0, 16);
+
+               sprintf(map_banks[idx]->name, "TQM834x-%d", idx);
+               map_banks[idx]->size = flash_size;
+               map_banks[idx]->bankwidth = 4;
+
+               simple_map_init(map_banks[idx]);
+
+               map_banks[idx]->virt = (void __iomem *)
+                       (start_scan_addr + ((idx > 0) ?
+                       (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0));
+               map_banks[idx]->phys =
+                       flash_addr + ((idx > 0) ?
+                       (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0);
+
+               /* start to probe flash chips */
+               mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
+               if (mtd_banks[idx]) {
+                       mtd_banks[idx]->owner = THIS_MODULE;
+                       mtd_size += mtd_banks[idx]->size;
+                       num_banks++;
+                       pr_debug("%s: bank %ld, name: %s, size: %d bytes \n",
+                                __FUNCTION__, num_banks,
+                                mtd_banks[idx]->name, mtd_banks[idx]->size);
+               }
+       }
+
+       /* no supported flash chips found */
+       if (!num_banks) {
+               printk("TQM834x: No supported flash chips found!\n");
+               ret = -ENXIO;
+               goto error_mem;
+       }
+
+#ifdef CONFIG_MTD_PARTITIONS
+       /*
+        * Select static partition definitions
+        */
+       n = ARRAY_SIZE(tqm834x_partitions_bank1);
+       part_banks[0].mtd_part  = tqm834x_partitions_bank1;
+       part_banks[0].type      = "static image bank1";
+       part_banks[0].nums      = n;
+
+       /* update last partition size to cover actual remaining space */
+       tqm834x_partitions_bank1[n - 1].size =
+               mtd_banks[0]->size -
+               tqm834x_partitions_bank1[n - 1].offset;
+       
+       /* check if we have second bank? */
+       if (num_banks == 2) {
+               n = ARRAY_SIZE(tqm834x_partitions_bank2);
+               part_banks[1].mtd_part  = tqm834x_partitions_bank2;
+               part_banks[1].type      = "static image bank2";
+               part_banks[1].nums      = n;
+
+               /* update last partition size to cover actual remaining space */
+               tqm834x_partitions_bank2[n - 1].size =
+                       mtd_banks[1]->size -
+                       tqm834x_partitions_bank2[n - 1].offset;
+       }
+
+       for(idx = 0; idx < num_banks ; idx++) {
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+               sprintf(mtdid, "%d", idx);
+               n = parse_mtd_partitions(mtd_banks[idx],
+                                        part_probes,
+                                        &part_banks[idx].mtd_part,
+                                        0);
+               pr_debug("%s: %d command line partitions on bank %s\n",
+                        __FUNCTION__, n, mtdid);
+               if (n > 0) {
+                       part_banks[idx].type = "command line";
+                       part_banks[idx].nums = n;
+               }
+#endif /* CONFIG_MTD_CMDLINE_PARTS */
+               if (part_banks[idx].nums == 0) {
+                       printk(KERN_NOTICE
+                              "TQM834x flash bank %d: no partition info "
+                              "available, registering whole device\n", idx);
+                       add_mtd_device(mtd_banks[idx]);
+               } else {
+                       printk(KERN_NOTICE 
+                              "TQM834x flash bank %d: Using %s partition "
+                              "definition\n", idx, part_banks[idx].type);
+                       add_mtd_partitions(mtd_banks[idx],
+                                          part_banks[idx].mtd_part, 
+                                          part_banks[idx].nums);
+               }
+       }
+#else  /* ! CONFIG_MTD_PARTITIONS */
+       printk(KERN_NOTICE "TQM834x flash: registering %d flash banks "
+                       "at once\n", num_banks);
+
+       for(idx = 0 ; idx < num_banks ; idx++)
+               add_mtd_device(mtd_banks[idx]);
+
+#endif /* CONFIG_MTD_PARTITIONS */
+
+       return 0;
+error_mem:
+       for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
+               if (map_banks[idx] != NULL) {
+                       if (map_banks[idx]->name != NULL) {
+                               kfree(map_banks[idx]->name);
+                               map_banks[idx]->name = NULL;
+                       }
+                       kfree(map_banks[idx]);
+                       map_banks[idx] = NULL;
+               }
+       }
+
+       iounmap((void *)start_scan_addr);
+
+       return ret;
+}
+
+static void __exit cleanup_tqm834x_mtd(void)
+{
+       unsigned int idx = 0;
+       for(idx = 0 ; idx < num_banks ; idx++) {
+               /* destroy mtd_info previously allocated */
+               if (mtd_banks[idx]) {
+                       del_mtd_partitions(mtd_banks[idx]);
+                       map_destroy(mtd_banks[idx]);
+               }
+
+               /* release map_info not used anymore */
+               kfree(map_banks[idx]->name);
+               kfree(map_banks[idx]);
+       }
+
+       if (start_scan_addr) {
+               iounmap((void *)start_scan_addr);
+               start_scan_addr = 0;
+       }
+}
+
+module_init(init_tqm834x_mtd);
+module_exit(cleanup_tqm834x_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wolfgang Denk <wd@denx.de>");
+MODULE_DESCRIPTION("MTD map driver for TQM834x boards");