#define CPU_NAME "COLDFIRE(m520x)"
#define CPU_INSTR_PER_JIFFY 3
+#include <asm/m52xxacr.h>
+
/*
* Define the 520x SIM register set addresses.
*/
#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
+/*
+ * EPORT and GPIO registers.
+ */
#define MCFEPORT_EPDDR 0xFC088002
#define MCFEPORT_EPDR 0xFC088004
#define MCFEPORT_EPPDR 0xFC088005
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m52xxacr.h -- ColdFire version 2 core cache support
+ *
+ * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef m52xxacr_h
+#define m52xxacr_h
+/****************************************************************************/
+
+/*
+ * All varients of the ColdFire using version 2 cores have a similar
+ * cache setup. Although not absolutely identical the cache register
+ * definitions are compatible for all of them. Mostly they support a
+ * configurable cache memory that can be instruction only, data only,
+ * or split instruction and data. The exception is the very old version 2
+ * core based parts, like the 5206(e), 5249 and 5272, which are instruction
+ * cache only. Cache size varies from 2k up to 16k.
+ */
+
+/*
+ * Define the Cache Control register flags.
+ */
+#define CACR_CENB 0x80000000 /* Enable cache */
+#define CACR_CDPI 0x10000000 /* Disable invalidation by CPUSHL */
+#define CACR_CFRZ 0x08000000 /* Cache freeze mode */
+#define CACR_CINV 0x01000000 /* Invalidate cache */
+#define CACR_DISI 0x00800000 /* Disable instruction cache */
+#define CACR_DISD 0x00400000 /* Disable data cache */
+#define CACR_INVI 0x00200000 /* Invalidate instruction cache */
+#define CACR_INVD 0x00100000 /* Invalidate data cache */
+#define CACR_CEIB 0x00000400 /* Non-cachable instruction burst */
+#define CACR_DCM 0x00000200 /* Default cache mode */
+#define CACR_DBWE 0x00000100 /* Buffered write enable */
+#define CACR_DWP 0x00000020 /* Write protection */
+#define CACR_EUSP 0x00000010 /* Enable separate user a7 */
+
+/*
+ * Define the Access Control register flags.
+ */
+#define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */
+#define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */
+#define ACR_ENABLE 0x00008000 /* Enable this ACR */
+#define ACR_USER 0x00000000 /* Allow only user accesses */
+#define ACR_SUPER 0x00002000 /* Allow supervisor access only */
+#define ACR_ANY 0x00004000 /* Allow any access type */
+#define ACR_CENB 0x00000000 /* Caching of region enabled */
+#define ACR_CDIS 0x00000040 /* Caching of region disabled */
+#define ACR_BWE 0x00000020 /* Write buffer enabled */
+#define ACR_WPROTECT 0x00000004 /* Write protect region */
+
+/****************************************************************************/
+#endif /* m52xxsim_h */
projects / linux-edison.git / commitdiff