staging: comedi: addi_apci_2200: cleanup digital output subdevice
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Fri, 18 Jan 2013 00:40:31 +0000 (17:40 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 18 Jan 2013 20:49:25 +0000 (12:49 -0800)
The board supported by this driver always has a digital output subdevice.
Remove the boardinfo for it and just open-code the relevant data in the
subdevice init.

Remove the SDF_GROUND and SDF_COMMON from the subdevice 'subdev_flags'.
These flags only have meaning for analog input/output subdevices. Also,
remove the SDF_READABLE flag, it is not required by output only subdevices.

Remove the subdevice 'len_chanlist' initialization. This variable only
has meaning for subdevices that support asynchronous commands.

Remove the subdevice 'io_bits' initialization. Digital output subdevices
don't use this variable.

Remove the subdevice function pointers that evaluate to NULL based on the
boardinfo data.

Move the apci2200_do_insn_bits() function from the hwdrv_apci2200.c file
into the main driver file.

For aesthetic reasons, rename the #define used for the register used to
read/write the digital outputs..

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
drivers/staging/comedi/drivers/addi_apci_2200.c

index f9784e9..4d32509 100644 (file)
@@ -46,12 +46,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour
   +----------+-----------+------------------------------------------------+
 */
 
-/*********      Definitions for APCI-2200 card  *****/
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-#define APCI2200_DIGITAL_OP            4
-
 /* TIMER COUNTER WATCHDOG DEFINES */
 
 #define APCI2200_WATCHDOG              0x08
@@ -59,27 +53,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 #define APCI2200_WATCHDOG_RELOAD_VALUE 4
 #define APCI2200_WATCHDOG_STATUS       16
 
-static int apci2200_do_insn_bits(struct comedi_device *dev,
-                                struct comedi_subdevice *s,
-                                struct comedi_insn *insn,
-                                unsigned int *data)
-{
-       unsigned int mask = data[0];
-       unsigned int bits = data[1];
-
-       s->state = inw(dev->iobase + APCI2200_DIGITAL_OP);
-       if (mask) {
-               s->state &= ~mask;
-               s->state |= (bits & mask);
-
-               outw(s->state, dev->iobase + APCI2200_DIGITAL_OP);
-       }
-
-       data[1] = s->state;
-
-       return insn->n;
-}
-
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI2200_ConfigWatchdog(struct comedi_device *dev,
index 3db402c..15a84e5 100644 (file)
@@ -9,15 +9,14 @@
  * I/O Register Map
  */
 #define APCI2200_DI_REG                        0x00
+#define APCI2200_DO_REG                        0x04
 
 static const struct addi_board apci2200_boardtypes[] = {
        {
                .pc_DriverName          = "apci2200",
                .i_VendorId             = PCI_VENDOR_ID_ADDIDATA,
                .i_DeviceId             = 0x1005,
-               .i_NbrDoChannel         = 16,
                .i_Timer                = 1,
-               .do_bits                = apci2200_do_insn_bits,
                .timer_config           = i_APCI2200_ConfigWatchdog,
                .timer_write            = i_APCI2200_StartStopWriteWatchdog,
                .timer_read             = i_APCI2200_ReadWatchdog,
@@ -34,9 +33,30 @@ static int apci2200_di_insn_bits(struct comedi_device *dev,
        return insn->n;
 }
 
+static int apci2200_do_insn_bits(struct comedi_device *dev,
+                                struct comedi_subdevice *s,
+                                struct comedi_insn *insn,
+                                unsigned int *data)
+{
+       unsigned int mask = data[0];
+       unsigned int bits = data[1];
+
+       s->state = inw(dev->iobase + APCI2200_DO_REG);
+       if (mask) {
+               s->state &= ~mask;
+               s->state |= (bits & mask);
+
+               outw(s->state, dev->iobase + APCI2200_DO_REG);
+       }
+
+       data[1] = s->state;
+
+       return insn->n;
+}
+
 static int apci2200_reset(struct comedi_device *dev)
 {
-       outw(0x0, dev->iobase + APCI2200_DIGITAL_OP);
+       outw(0x0, dev->iobase + APCI2200_DO_REG);
        outw(0x0, dev->iobase + APCI2200_WATCHDOG +
                        APCI2200_WATCHDOG_ENABLEDISABLE);
        outw(0x0, dev->iobase + APCI2200_WATCHDOG +
@@ -114,24 +134,12 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 
        /*  Allocate and Initialise DO Subdevice Structures */
        s = &dev->subdevices[3];
-       if (this_board->i_NbrDoChannel) {
-               s->type = COMEDI_SUBD_DO;
-               s->subdev_flags =
-                       SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
-               s->n_chan = this_board->i_NbrDoChannel;
-               s->maxdata = this_board->i_DoMaxdata;
-               s->len_chanlist = this_board->i_NbrDoChannel;
-               s->range_table = &range_digital;
-               s->io_bits = 0xf;       /* all bits output */
-
-               /* insn_config - for digital output memory */
-               s->insn_config = this_board->do_config;
-               s->insn_write = this_board->do_write;
-               s->insn_bits = this_board->do_bits;
-               s->insn_read = this_board->do_read;
-       } else {
-               s->type = COMEDI_SUBD_UNUSED;
-       }
+       s->type         = COMEDI_SUBD_DO;
+       s->subdev_flags = SDF_WRITEABLE;
+       s->n_chan       = 16;
+       s->maxdata      = 1;
+       s->range_table  = &range_digital;
+       s->insn_bits    = apci2200_do_insn_bits;
 
        /*  Allocate and Initialise Timer Subdevice Structures */
        s = &dev->subdevices[4];