#include <plat/board-ams-delta.h>
#include <linux/platform_data/keypad-omap.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
#include <linux/platform_data/keypad-omap.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/usb.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/irda.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <plat/dma.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/tc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/mmc.h>
#include <plat/clock.h>
#include <asm/mach/map.h>
#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
#include <plat/irda.h>
#include <plat/led.h>
#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/irda.h>
#include <asm/mach/map.h>
#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/irda.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
#include <plat/flash.h>
#include <asm/mach/map.h>
#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/irda.h>
#include <plat/tc.h>
#include <plat/board-voiceblue.h>
#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/mmc.h>
*/
#include <plat/i2c.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/cpu.h>
void __init omap1_i2c_mux_pins(int bus_id)
#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include "leds.h"
#include <linux/slab.h>
#include <plat/dma.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <mach/hardware.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#ifdef CONFIG_OMAP_MUX
#endif
}
+static struct omap_mux_cfg *mux_cfg;
+
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
+{
+ if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+ || !arch_mux_cfg->cfg_reg) {
+ printk(KERN_ERR "Invalid pin table\n");
+ return -EINVAL;
+ }
+
+ mux_cfg = arch_mux_cfg;
+
+ return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+ struct pin_config *reg;
+
+ if (!cpu_class_is_omap1()) {
+ printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+ index);
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ if (mux_cfg == NULL) {
+ printk(KERN_ERR "Pin mux table not initialized\n");
+ return -ENODEV;
+ }
+
+ if (index >= mux_cfg->size) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, mux_cfg->size);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ reg = &mux_cfg->pins[index];
+
+ if (!mux_cfg->cfg_reg)
+ return -ENODEV;
+
+ return mux_cfg->cfg_reg(reg);
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+
int __init omap1_mux_init(void)
{
if (cpu_is_omap7xx()) {
return omap_mux_register(&arch_mux_cfg);
}
-#endif
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x) do {} while(0)
+#endif /* CONFIG_OMAP_MUX */
+
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
#include "pm.h"
#include <asm/irq.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/usb.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/mux.h>
#include <plat/clock.h>
#include "soc.h"
#include <plat/mmc.h>
#include <plat/omap-pm.h>
-#include <plat/mux.h>
#include <plat/omap_device.h>
#include "mux.h"
#
# Common support
-obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o
+obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
#include <linux/clk.h>
#include <mach/irqs.h>
-#include <plat/mux.h>
#include <plat/i2c.h>
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
#include <linux/device.h>
#include <linux/pm_qos.h>
-#include <plat/mux.h>
-
#define DRIVER_NAME "omap_uart"
/*
+++ /dev/null
-/*
- * linux/arch/arm/plat-omap/mux.c
- *
- * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/system.h>
-
-#include <plat/cpu.h>
-#include <plat/mux.h>
-
-#ifdef CONFIG_OMAP_MUX
-
-static struct omap_mux_cfg *mux_cfg;
-
-int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
-{
- if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
- || !arch_mux_cfg->cfg_reg) {
- printk(KERN_ERR "Invalid pin table\n");
- return -EINVAL;
- }
-
- mux_cfg = arch_mux_cfg;
-
- return 0;
-}
-
-/*
- * Sets the Omap MUX and PULL_DWN registers based on the table
- */
-int __init_or_module omap_cfg_reg(const unsigned long index)
-{
- struct pin_config *reg;
-
- if (!cpu_class_is_omap1()) {
- printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
- index);
- WARN_ON(1);
- return -EINVAL;
- }
-
- if (mux_cfg == NULL) {
- printk(KERN_ERR "Pin mux table not initialized\n");
- return -ENODEV;
- }
-
- if (index >= mux_cfg->size) {
- printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
- index, mux_cfg->size);
- dump_stack();
- return -ENODEV;
- }
-
- reg = &mux_cfg->pins[index];
-
- if (!mux_cfg->cfg_reg)
- return -ENODEV;
-
- return mux_cfg->cfg_reg(reg);
-}
-EXPORT_SYMBOL(omap_cfg_reg);
-#else
-#define omap_mux_init() do {} while(0)
-#define omap_cfg_reg(x) do {} while(0)
-#endif /* CONFIG_OMAP_MUX */
#include <plat/mmc.h>
#include <asm/gpio.h>
#include <plat/dma.h>
-#include <plat/mux.h>
#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
#include <asm/io.h>
#include <asm/sizes.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
#include <mach/hardware.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <plat/dma.h>
-#include <plat/mux.h>
#include "musb_core.h"
#include "tusb6010.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/usb.h>
#include <linux/platform_data/omap1_bl.h>
#include <mach/hardware.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#define OMAPBL_MAX_INTENSITY 0xff
#include <linux/platform_device.h>
#include <asm/gpio.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include "omapfb.h"
static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)