bool
select MACH_MX21
select CPU_ARM926T
- select ARCH_MXC_AUDMUX
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
bool
select ARCH_MX25
select CPU_ARM926T
- select ARCH_MXC_AUDMUX
select ARCH_MXC_IOMUX_V3
select MXC_AVIC
bool
select MACH_MX27
select CPU_ARM926T
- select ARCH_MXC_AUDMUX
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
bool
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
- select ARCH_MXC_AUDMUX
select MXC_AVIC
select SMP_ON_UP if SMP
bool
select CPU_V6
select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
select CPU_V7
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX
select ARCH_HAS_CPUFREQ
select ARCH_MX5
bool
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx51.h>
-#include <mach/audmux.h>
#include "devices-imx51.h"
config ARCH_MXC_IOMUX_V3
bool
-config ARCH_MXC_AUDMUX
- bool
-
config IRAM_ALLOC
bool
select GENERIC_ALLOCATOR
obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
-obj-$(CONFIG_ARCH_MXC_AUDMUX) += audmux.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
ifdef CONFIG_SND_IMX_SOC
select SND_SOC_DMAENGINE_PCM
tristate
+config SND_SOC_IMX_AUDMUX
+ tristate
+
config SND_MXC_SOC_WM1133_EV1
tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_MXC_SOC_FIQ
+ select SND_SOC_IMX_AUDMUX
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
depends on MACH_IMX27_VISSTRIM_M10 && I2C
select SND_SOC_TLV320AIC32X4
select SND_MXC_SOC_MX2
+ select SND_SOC_IMX_AUDMUX
help
Say Y if you want to add support for SoC audio on Visstrim SM10
board with TLV320AIC32X4 codec.
select SND_SOC_AC97_BUS
select SND_SOC_WM9712
select SND_MXC_SOC_FIQ
+ select SND_SOC_IMX_AUDMUX
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
depends on I2C
select SND_SOC_TLV320AIC23
select SND_MXC_SOC_FIQ
+ select SND_SOC_IMX_AUDMUX
help
Enable I2S based access to the TLV320AIC23B codec attached
to the SSI interface
snd-soc-imx-objs := imx-ssi.o
snd-soc-imx-fiq-objs := imx-pcm-fiq.o
snd-soc-imx-mx2-objs := imx-pcm-dma-mx2.o
+snd-soc-imx-audmux-objs := imx-audmux.o
obj-$(CONFIG_SND_IMX_SOC) += snd-soc-imx.o
obj-$(CONFIG_SND_MXC_SOC_FIQ) += snd-soc-imx-fiq.o
obj-$(CONFIG_SND_MXC_SOC_MX2) += snd-soc-imx-mx2.o
+obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
# i.MX Machine Support
snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/audmux.h>
#include "../codecs/tlv320aic23.h"
#include "imx-ssi.h"
+#include "imx-audmux.h"
#define CODEC_CLOCK 12000000
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <mach/audmux.h>
+
+#include "imx-audmux.h"
#define DRIVER_NAME "imx-audmux"
-#ifndef __MACH_AUDMUX_H
-#define __MACH_AUDMUX_H
+#ifndef __IMX_AUDMUX_H
+#define __IMX_AUDMUX_H
#define MX27_AUDMUX_HPCR1_SSI0 0
#define MX27_AUDMUX_HPCR2_SSI1 1
int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
unsigned int pdcr);
-#endif /* __MACH_AUDMUX_H */
+#endif /* __IMX_AUDMUX_H */
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
#include <asm/mach-types.h>
-#include <mach/audmux.h>
#include <mach/iomux-mx27.h>
#include "../codecs/tlv320aic32x4.h"
#include "imx-ssi.h"
+#include "imx-audmux.h"
#define MX27VIS_AMP_GAIN 0
#define MX27VIS_AMP_MUTE 1
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/audmux.h>
+
+#include "imx-audmux.h"
static struct snd_soc_card imx_phycore;
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <mach/audmux.h>
-
#include "imx-ssi.h"
#include "../codecs/wm8350.h"
+#include "imx-audmux.h"
/* There is a silicon mic on the board optionally connected via a solder pad
* SP1. Define this to enable it.