[media] az6007: Remove some dead code that doesn't seem to be needed
authorMauro Carvalho Chehab <mchehab@redhat.com>
Sat, 23 Jul 2011 13:12:12 +0000 (10:12 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Sat, 21 Jan 2012 15:44:55 +0000 (13:44 -0200)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb/dvb-usb/az6007.c

index ed376b8..1fc174b 100644 (file)
@@ -17,17 +17,8 @@ int dvb_usb_az6007_debug;
 module_param_named(debug,dvb_usb_az6007_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
 
-
-static int az6007_type =0;
-module_param(az6007_type, int, 0644);
-MODULE_PARM_DESC(az6007_type, "select delivery mode (0=DVB-T, 1=DVB-T");
-
-//module_param_named(type, 6007_type, int, 0644);
-//MODULE_PARM_DESC(type, "select delivery mode (0=DVB-T, 1=DVB-C)");
-
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-
 struct az6007_device_state {
        struct dvb_ca_en50221 ca;
        struct mutex ca_mutex;
@@ -110,57 +101,22 @@ static int az6007_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
 {
        int ret;
 
-#if 0
-       int i=0, cyc=0, rem=0;
-       cyc = blen/64;
-       rem = blen%64;
-#endif
-
        deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index);
        debug_dump(b,blen,deb_xfer);
 
-
-#if 0
-       if (blen>64)
-       {
-               for (i=0; i<cyc; i++)
-               {
-                       if ((ret = usb_control_msg(d->udev,
-                               usb_sndctrlpipe(d->udev,0),
-                               req,
-                               USB_TYPE_VENDOR | USB_DIR_OUT,
-                               value,index+i*64,b+i*64,64,
-                               5000)) != 64) {
-                               warn("usb out operation failed. (%d)",ret);
-                               return -EIO;
-                       }
-               }
-
-               if (rem>0)
-               {
-                       if ((ret = usb_control_msg(d->udev,
-                               usb_sndctrlpipe(d->udev,0),
-                               req,
-                               USB_TYPE_VENDOR | USB_DIR_OUT,
-                               value,index+cyc*64,b+cyc*64,rem,
-                               5000)) != rem) {
-                               warn("usb out operation failed. (%d)",ret);
-                               return -EIO;
-                       }
-               }
+       if (blen > 64) {
+               printk(KERN_ERR "az6007: doesn't suport I2C transactions longer than 64 bytes\n");
+               return -EOPNOTSUPP;
        }
-       else
-#endif
-       {
-               if ((ret = usb_control_msg(d->udev,
-                               usb_sndctrlpipe(d->udev,0),
-                               req,
-                               USB_TYPE_VENDOR | USB_DIR_OUT,
-                               value,index,b,blen,
-                               5000)) != blen) {
-                       warn("usb out operation failed. (%d)",ret);
-                       return -EIO;
-               }
+
+       if ((ret = usb_control_msg(d->udev,
+                       usb_sndctrlpipe(d->udev,0),
+                       req,
+                       USB_TYPE_VENDOR | USB_DIR_OUT,
+                       value,index,b,blen,
+                       5000)) != blen) {
+               warn("usb out operation failed. (%d)",ret);
+               return -EIO;
        }
 
        return 0;
@@ -232,7 +188,7 @@ static int az6007_frontend_poweron(struct dvb_usb_adapter *adap)
        info("az6007_frontend_poweron adap=%p adap->dev=%p", adap, adap->dev);
 
        req = 0xBC;
-       value = 1;//power on
+       value = 1;              /* power on */
        index = 3;
        blen =0;
 
@@ -245,7 +201,7 @@ static int az6007_frontend_poweron(struct dvb_usb_adapter *adap)
        msleep_interruptible(200);
 
        req = 0xBC;
-       value = 0;//power on
+       value = 0;              /* power off */
        index = 3;
        blen =0;
 
@@ -258,7 +214,7 @@ static int az6007_frontend_poweron(struct dvb_usb_adapter *adap)
        msleep_interruptible(200);
 
        req = 0xBC;
-       value = 1;//power on
+       value = 1;              /* power on */
        index = 3;
        blen =0;
 
@@ -552,9 +508,6 @@ static u32 az6007_i2c_func(struct i2c_adapter *adapter)
 static struct i2c_algorithm az6007_i2c_algo = {
        .master_xfer   = az6007_i2c_xfer,
        .functionality = az6007_i2c_func,
-#ifdef NEED_ALGO_CONTROL
-       .algo_control = dummy_algo_control,
-#endif
 };
 
 int az6007_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
@@ -678,5 +631,5 @@ module_exit(az6007_usb_module_exit);
 
 MODULE_AUTHOR("Henry Wang <Henry.wang@AzureWave.com>");
 MODULE_DESCRIPTION("Driver for AzureWave 6007 DVB-C/T USB2.0 and clones");
-MODULE_VERSION("1.0");
+MODULE_VERSION("1.1");
 MODULE_LICENSE("GPL");