staging: rtl8192e: Remove dead code
authorMike McCormack <mikem@ring3k.org>
Sun, 6 Feb 2011 13:57:48 +0000 (22:57 +0900)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 9 Feb 2011 19:50:21 +0000 (11:50 -0800)
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/rtl8192e/r8192E_core.c

index 84b56cc..630b1c7 100644 (file)
@@ -577,15 +577,10 @@ static void rtl8192_proc_remove_one(struct net_device *dev)
        printk("dev name=======> %s\n",dev->name);
 
        if (priv->dir_dev) {
-       //      remove_proc_entry("stats-hw", priv->dir_dev);
                remove_proc_entry("stats-tx", priv->dir_dev);
                remove_proc_entry("stats-rx", priv->dir_dev);
-       //      remove_proc_entry("stats-ieee", priv->dir_dev);
                remove_proc_entry("stats-ap", priv->dir_dev);
                remove_proc_entry("registers", priv->dir_dev);
-       //      remove_proc_entry("cck-registers",priv->dir_dev);
-       //      remove_proc_entry("ofdm-registers",priv->dir_dev);
-               //remove_proc_entry(dev->name, rtl8192_proc);
                remove_proc_entry("wlan0", rtl8192_proc);
                priv->dir_dev = NULL;
        }
@@ -1548,7 +1543,7 @@ static void rtl8192_link_change(struct net_device *dev)
 {
        struct r8192_priv *priv = ieee80211_priv(dev);
        struct ieee80211_device* ieee = priv->ieee80211;
-       //write_nic_word(priv, BCN_INTR_ITV, net->beacon_interval);
+
        if (ieee->state == IEEE80211_LINKED)
        {
                rtl8192_net_update(dev);
@@ -1562,9 +1557,7 @@ static void rtl8192_link_change(struct net_device *dev)
        {
                write_nic_byte(priv, 0x173, 0);
        }
-       /*update timing params*/
-       //rtl8192_set_chan(dev, priv->chan);
-       //MSR
+
        rtl8192_update_msr(dev);
 
        // 2007/10/16 MH MAC Will update TSF according to all received beacon, so we have
@@ -1631,7 +1624,6 @@ static void rtl8192_qos_activate(struct work_struct * work)
                                (((u32)(qos_parameters->cw_min[i]))<< AC_PARAM_ECW_MIN_OFFSET)|
                                ((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
                write_nic_dword(priv, WDCAPARA_ADD[i], u4bAcParam);
-               //write_nic_dword(priv, WDCAPARA_ADD[i], 0x005e4332);
        }
 
 success:
@@ -2054,8 +2046,6 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
        priv->ieee80211->modulation = IEEE80211_CCK_MODULATION | IEEE80211_OFDM_MODULATION;
        priv->ieee80211->host_encrypt = 1;
        priv->ieee80211->host_decrypt = 1;
-       //priv->ieee80211->start_send_beacons = NULL;//rtl819xusb_beacon_tx;//-by amy 080604
-       //priv->ieee80211->stop_send_beacons = NULL;//rtl8192_beacon_stop;//-by amy 080604
        priv->ieee80211->start_send_beacons = rtl8192_start_beacon;//+by david 081107
        priv->ieee80211->stop_send_beacons = rtl8192_stop_beacon;//+by david 081107
        priv->ieee80211->softmac_hard_start_xmit = rtl8192_hard_start_xmit;
@@ -2070,22 +2060,17 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
        priv->ieee80211->tx_headroom = sizeof(TX_FWINFO_8190PCI);
        priv->ieee80211->qos_support = 1;
        priv->ieee80211->dot11PowerSaveMode = 0;
-       //added by WB
-//     priv->ieee80211->SwChnlByTimerHandler = rtl8192_phy_SwChnl;
        priv->ieee80211->SetBWModeHandler = rtl8192_SetBWMode;
        priv->ieee80211->handle_assoc_response = rtl8192_handle_assoc_response;
        priv->ieee80211->handle_beacon = rtl8192_handle_beacon;
 
        priv->ieee80211->sta_wake_up = rtl8192_hw_wakeup;
-//     priv->ieee80211->ps_request_tx_ack = rtl8192_rq_tx_ack;
        priv->ieee80211->enter_sleep_state = rtl8192_hw_to_sleep;
        priv->ieee80211->ps_is_queue_empty = rtl8192_is_tx_queue_empty;
-       //added by david
        priv->ieee80211->GetNmodeSupportBySecCfg = GetNmodeSupportBySecCfg8190Pci;
        priv->ieee80211->SetWirelessMode = rtl8192_SetWirelessMode;
        priv->ieee80211->GetHalfNmodeSupportByAPsHandler = GetHalfNmodeSupportByAPs819xPci;
 
-       //added by amy
        priv->ieee80211->InitialGainHandler = InitialGain819xPci;
 
 #ifdef ENABLE_IPS
@@ -2152,15 +2137,11 @@ static void rtl8192_init_priv_task(struct net_device* dev)
        INIT_WORK(&priv->ieee80211->ips_leave_wq, IPSLeave_wq);
 #endif
 
-//     INIT_WORK(&priv->reset_wq, (void(*)(void*)) rtl8192_restart);
        INIT_WORK(&priv->reset_wq,  rtl8192_restart);
-//     INIT_DELAYED_WORK(&priv->watch_dog_wq, hal_dm_watchdog);
        INIT_DELAYED_WORK(&priv->watch_dog_wq, rtl819x_watchdog_wqcallback);
        INIT_DELAYED_WORK(&priv->txpower_tracking_wq,  dm_txpower_trackingcallback);
        INIT_DELAYED_WORK(&priv->rfpath_check_wq,  dm_rf_pathcheck_workitemcallback);
        INIT_DELAYED_WORK(&priv->update_beacon_wq, rtl8192_update_beacon);
-       //INIT_WORK(&priv->SwChnlWorkItem,  rtl8192_SwChnl_WorkItem);
-       //INIT_WORK(&priv->SetBWModeWorkItem,  rtl8192_SetBWModeWorkItem);
        INIT_WORK(&priv->qos_activate, rtl8192_qos_activate);
        INIT_DELAYED_WORK(&priv->ieee80211->hw_wakeup_wq, rtl8192_hw_wakeup_wq);
        INIT_DELAYED_WORK(&priv->ieee80211->hw_sleep_wq, rtl8192_hw_sleep_wq);
@@ -2399,10 +2380,6 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
                }
                else if(priv->epromtype == EPROM_93c56)
                {
-                       //char  cck_pwr_diff_a=0, cck_pwr_diff_c=0;
-
-                       //cck_pwr_diff_a = pHalData->EEPROMRfACCKChnl7TxPwLevel - pHalData->EEPROMRfAOfdmChnlTxPwLevel[1];
-                       //cck_pwr_diff_c = pHalData->EEPROMRfCCCKChnl7TxPwLevel - pHalData->EEPROMRfCOfdmChnlTxPwLevel[1];
                        for(i=0; i<3; i++)      // channel 1~3 use the same Tx Power Level.
                        {
                                priv->TxPowerLevelCCK_A[i]  = priv->EEPROMRfACCKChnl1TxPwLevel[0];
@@ -2509,15 +2486,6 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
                        break;
 
                case EEPROM_CID_WHQL:
-                       //Adapter->bInHctTest = TRUE;//do not supported
-
-                       //priv->bSupportTurboMode = FALSE;
-                       //priv->bAutoTurboBy8186 = FALSE;
-
-                       //pMgntInfo->PowerSaveControl.bInactivePs = FALSE;
-                       //pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE;
-                       //pMgntInfo->PowerSaveControl.bLeisurePs = FALSE;
-
                        break;
                default:
                        // value from RegCustomerID
@@ -2634,8 +2602,6 @@ static short rtl8192_init(struct net_device *dev)
                return -1;
        }
 
-       //rtl8192_rx_enable(dev);
-       //rtl8192_adapter_start(dev);
        return 0;
 }
 
@@ -2720,10 +2686,8 @@ static void rtl8192_hwconfig(struct net_device* dev)
 static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 {
        struct r8192_priv *priv = ieee80211_priv(dev);
-//     struct ieee80211_device *ieee = priv->ieee80211;
        u32 ulRegRead;
        RT_STATUS rtStatus = RT_STATUS_SUCCESS;
-       //u8 eRFPath;
        u8 tmpvalue;
        u8 ICVersion,SwitchingRegulatorOutput;
        bool bfirmwareok = true;
@@ -2763,7 +2727,6 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
                RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __FUNCTION__,   priv->pFirmware->firmware_status);
 
        write_nic_dword(priv, CPU_GEN, ulRegRead);
-       //mdelay(100);
 
        //3//
        //3 //Fix the issue of E-cut high temperature issue
@@ -2802,7 +2765,6 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
        //      because setting of System_Reset bit reset MAC to default transmission mode.
                //Loopback mode or not
        priv->LoopbackMode = RTL819X_NO_LOOPBACK;
-       //priv->LoopbackMode = RTL819X_MAC_LOOPBACK;
        if(priv->ResetProgress == RESET_TYPE_NORESET)
        {
        ulRegRead = read_nic_dword(priv, CPU_GEN);
@@ -2846,21 +2808,6 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
        write_nic_dword(priv, RCR, priv->ReceiveConfig);
 
        //3 Initialize Number of Reserved Pages in Firmware Queue
-       #ifdef TO_DO_LIST
-       if(priv->bInHctTest)
-       {
-               PlatformEFIOWrite4Byte(Adapter, RQPN1,  NUM_OF_PAGE_IN_FW_QUEUE_BK_DTM << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
-                                       NUM_OF_PAGE_IN_FW_QUEUE_BE_DTM << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
-                                       NUM_OF_PAGE_IN_FW_QUEUE_VI_DTM << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
-                                       NUM_OF_PAGE_IN_FW_QUEUE_VO_DTM <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
-               PlatformEFIOWrite4Byte(Adapter, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT);
-               PlatformEFIOWrite4Byte(Adapter, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW|
-                                       NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT|
-                                       NUM_OF_PAGE_IN_FW_QUEUE_PUB_DTM<<RSVD_FW_QUEUE_PAGE_PUB_SHIFT);
-       }
-       else
-       #endif
-       {
                write_nic_dword(priv, RQPN1,  NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
                                        NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
                                        NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
@@ -2869,7 +2816,6 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
                write_nic_dword(priv, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW|
                                        NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT|
                                        NUM_OF_PAGE_IN_FW_QUEUE_PUB<<RSVD_FW_QUEUE_PAGE_PUB_SHIFT);
-       }
 
        rtl8192_tx_enable(dev);
        rtl8192_rx_enable(dev);
@@ -2884,7 +2830,6 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
        // TODO: (it value is only for FPGA version). need to be changed!!2006.12.18, by Emily
        write_nic_byte(priv, ACK_TIMEOUT, 0x30);
 
-       //rtl8192_actset_wirelessmode(dev,priv->RegWirelessMode);
        if(priv->ResetProgress == RESET_TYPE_NORESET)
        rtl8192_SetWirelessMode(dev, priv->ieee80211->mode);
        //-----------------------------------------------------------------------------
@@ -2996,18 +2941,6 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
                RT_TRACE((COMP_INIT|COMP_RF|COMP_POWER), "%s(): RF-ON \n",__FUNCTION__);
                priv->ieee80211->eRFPowerState = eRfOn;
                priv->ieee80211->RfOffReason = 0;
-               //DrvIFIndicateCurrentPhyStatus(Adapter);
-       // LED control
-       //Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_ON);
-
-       //
-       // If inactive power mode is enabled, disable rf while in disconnected state.
-       // But we should still tell upper layer we are in rf on state.
-       // 2007.07.16, by shien chang.
-       //
-               //if(!Adapter->bInHctTest)
-       //IPSEnter(Adapter);
-
        }
 }
 #endif
@@ -3627,7 +3560,6 @@ bool MgntActSet_802_11_PowerSaveMode(struct net_device *dev,      u8 rtPsMode)
        {
                 unsigned long flags;
 
-               //PlatformSetTimer(Adapter, &(pMgntInfo->AwakeTimer), 0);
                // Notify the AP we awke.
                rtl8192_hw_wakeup(dev);
                priv->ieee80211->sta_sleep = 0;
@@ -3647,10 +3579,6 @@ void LeisurePSEnter(struct net_device *dev)
        struct r8192_priv *priv = ieee80211_priv(dev);
        PRT_POWER_SAVE_CONTROL pPSC = (PRT_POWER_SAVE_CONTROL)(&(priv->ieee80211->PowerSaveControl));
 
-       //RT_TRACE(COMP_PS, "LeisurePSEnter()...\n");
-       //RT_TRACE(COMP_PS, "pPSC->bLeisurePs = %d, ieee->ps = %d,pPSC->LpsIdleCount is %d,RT_CHECK_FOR_HANG_PERIOD is %d\n",
-       //      pPSC->bLeisurePs, priv->ieee80211->ps,pPSC->LpsIdleCount,RT_CHECK_FOR_HANG_PERIOD);
-
        if(!((priv->ieee80211->iw_mode == IW_MODE_INFRA) &&
                (priv->ieee80211->state == IEEE80211_LINKED)) ||
                (priv->ieee80211->iw_mode == IW_MODE_ADHOC) ||
@@ -3665,8 +3593,6 @@ void LeisurePSEnter(struct net_device *dev)
 
                        if(priv->ieee80211->ps == IEEE80211_PS_DISABLED)
                        {
-
-                               //RT_TRACE(COMP_LPS, "LeisurePSEnter(): Enter 802.11 power save mode...\n");
                                MgntActSet_802_11_PowerSaveMode(dev, IEEE80211_PS_MBCAST|IEEE80211_PS_UNICAST);
 
                        }
@@ -3688,7 +3614,6 @@ void LeisurePSLeave(struct net_device *dev)
                if(priv->ieee80211->ps != IEEE80211_PS_DISABLED)
                {
                        // move to lps_wakecomplete()
-                       //RT_TRACE(COMP_LPS, "LeisurePSLeave(): Busy Traffic , Leave 802.11 power save..\n");
                        MgntActSet_802_11_PowerSaveMode(dev, IEEE80211_PS_DISABLED);
 
                }
@@ -3747,7 +3672,6 @@ IPSLeave(struct net_device *dev)
                {
                        RT_TRACE(COMP_POWER, "IPSLeave(): Turn on RF.\n");
                        pPSC->eInactivePowerState = eRfOn;
-//                     queue_work(priv->priv_wq,&(pPSC->InactivePsWorkItem));
                        InactivePsWorkItemCallback(dev);
                }
        }
@@ -3840,7 +3764,6 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
                    (!ieee->proto_stoppping) && !ieee->wx_set_enc){
                        if(ieee->PowerSaveControl.ReturnPoint == IPS_CALLBACK_NONE){
                                IPSEnter(dev);
-                               //ieee80211_stop_scan(priv->ieee80211);
                        }
                }
        }
@@ -3880,7 +3803,6 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
                else
                {
 #ifdef ENABLE_LPS
-                       //RT_TRACE(COMP_LPS,"====>no link LPS leave\n");
                        LeisurePSLeave(dev);
 #endif
                }
@@ -3893,8 +3815,6 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
 
 
        //added by amy for AP roaming
-       if (1)
-       {
                if(ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_INFRA)
                {
                        u32     TotalRxBcnNum = 0;
@@ -3919,7 +3839,6 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
              ieee->LinkDetectInfo.NumRecvBcnInPeriod=0;
               ieee->LinkDetectInfo.NumRecvDataInPeriod=0;
 
-       }
        //check if reset the driver
        spin_lock_irqsave(&priv->tx_lock,flags);
        if (priv->watchdog_check_reset_cnt++ >= 3 && !ieee->is_roaming && 
@@ -3963,7 +3882,6 @@ void watch_dog_timer_callback(unsigned long data)
 static int _rtl8192_up(struct net_device *dev)
 {
        struct r8192_priv *priv = ieee80211_priv(dev);
-       //int i;
        RT_STATUS init_status = RT_STATUS_SUCCESS;
        priv->up=1;
        priv->ieee80211->ieee_up=1;
@@ -4314,13 +4232,9 @@ static void rtl8192_process_phyinfo(struct r8192_priv * priv, u8* buffer,struct
        bool bcheck = false;
        u8      rfpath;
        u32 nspatial_stream, tmp_val;
-       //u8    i;
        static u32 slide_rssi_index=0, slide_rssi_statistics=0;
        static u32 slide_evm_index=0, slide_evm_statistics=0;
        static u32 last_rssi=0, last_evm=0;
-       //cosa add for rx path selection
-//     static long slide_cck_adc_pwdb_index=0, slide_cck_adc_pwdb_statistics=0;
-//     static char last_cck_adc_pwdb[4]={0,0,0,0};
        //cosa add for beacon rssi smoothing
        static u32 slide_beacon_adc_pwdb_index=0, slide_beacon_adc_pwdb_statistics=0;
        static u32 last_beacon_adc_pwdb=0;
@@ -5337,9 +5251,6 @@ static void rtl8192_cancel_deferred_work(struct r8192_priv* priv)
        cancel_delayed_work(&priv->gpio_change_rf_wq);
        cancel_work_sync(&priv->reset_wq);
        cancel_work_sync(&priv->qos_activate);
-       //cancel_work_sync(&priv->SetBWModeWorkItem);
-       //cancel_work_sync(&priv->SwChnlWorkItem);
-
 }